Knife Grinder

KS250

grat value straight knife grinder suitable mostly for big knives.

• Grinding length up to 7100 mm
• automatic downfeed of the grinding wheel
• rotating table from 0° - 90°
• magnetic table
• variable carriage speed
• PLC (digital programmer)

LA 500

Surface Grinder with vertical spindle

LA 500  is suitable for grinding circular blades and the surface of mechanical pieces.

• Automatic Downfeed of the grinding wheel
• Rotating Head from 0° upt to 90°
• variable table speed 3-45 rpm
• magnetic table

AM - BM

Knife sharpening machine

• Grinding Capacity: 650 mm / 850 mm
• Knives Holding Chuck: 90 mm
• Engine: 1,5 kW / 2800 rpm
• Grinding Wheel Dia: 127 mm
• Feed Speed: 11 m/min
• Weight: 170 kg / 190 kg

ZX 1000

Knife sharpening machine

• Grinding Capacity: 1000 mm
• magnetic chuck width: 100 mm
• Engine: 1,5 kW / 2800 rpm
• Grinding Wheel Dia: 127 mm
• Feed Speed: 11 m/min
• Weight: 250 kg

PX 1000

Knife sharpening machine

• Grinding Capacity: 1000 mm
• Knives Holding Chuck: 117 mm
• Engine: 2,2 kW / 2800 rpm
• Grinding Wheel Dia: 150 mm
• Feed Speed: 13 m/min
• Weight: 580 kg

FX 20

Surface grinding machine

• Grinding Capacity: 1500/2100/2500/3100/3600/4100/4500/5100/6100/7100 mm
• Rotating magnetic chuck widht: 150 mm
• Engine: 15 kW
• Grinding Wheel Dia: 200 mm
• Feed Speed: 1-30 m/min

FX 40

Surface grinding machine

• Grinding Capacity: 1500/2100/2500/3100/3600/4100/4500/5100/6100/7100 mm
• Rotating magnetic chuck width: 200 mm
• Fixed magnetic chick width: 400 mm
• Engine: 30 kW
• Grinding Wheel Dia: 350 mm
• Feed Speed: 1-25 m/min

MX 150

Heavy Duty automatic knife grinder

• Grinding Capacity: 1000/1500/2000 mm
• magnetic chuck width: 120 mm
• Engine: 3,7 kW / 5 kW
• Grinding Wheel Dia: 150 mm / 178 mm
• Feed Speed: 1-20 m/min

Magnetic Chuck for HM Knives Regrinding

The magnetic chuck is suitable for holding carbide (HM) tools, used for woodworking during re-grinding operations. It is especially suited for linear or surface grinders because the supporting bed is parallel with the magnetic surface. The chuck has a strong holding power because the tools lay directly onto the magnets and so you can re-sharpen very small pieces. The upper part of the chuck is made of BRASS, and that grants a longer life of the tool. The magnetic chuck can be:

• secured to any type of magnetic chuck
• mechanically bolted by means of the four holes around the edges, aligning or flanking a number of chucks.

The chuck is available in two sizes:

• part no. 452 5221500 - 200 x 70 x 20 [mm]
• part no. 452 5221600 - 400 x 70 x 20 [mm]

By aligning or flanking a number of magnetic chucks, extremely strong magnetic surfaces can be obtained.