Tel. +49 7351 6564
Fax +49 7351 9389
Automatic Plate Seat GrindingMachine
PLS 800 MB with automatic loading
and discharge of the Loading/Discharge Trolley
The economic solution:
for saw bodies from 100 mm to 800 mm diameter.
No cast components.
Very important for foreign sales.
Technical data:
Driving motor: | 1,1 kW, 2800 N |
Grinding spindle speed: | 4530 revs.= 47 Metres |
Grinding wheel: | CBN=Borazon |
Grinding wheel diameter: | 200 dia. coating width 2 mm, coating height 5 mm |
Tooth pitch: | from 6 mm to 100 mm |
Hook angle range: | – 15° + 25° |
Cycle time: | 4 – 8 secs. depending on saw body thickness and stock removal |
Cycle time during loading and discharge: 15 – 16 secs | |
Grinding feed: | Steplessly adjustable |
Rapid traverse: | Steplessly adjustable |
Max. pre-loading height of the loading trolley: | Saw blade body stack height 450 mm |
Control system: | hydropneumatic Festo control |
Air consumption: | approx. 40 Litres per Minute. |
Air consumption during loading and unloading: appr. 60 litres | |
Operating voltage: | 230/ 400 Volts, 50 cycles or 230/ 440 V, 60 cycles |
Fusing: | 3×16 Amp. time lag |
Rated output: | 1,4 kW |
Coolant capazity: | 63 Litres |
Dimensions: | height 200 cm, width 240 cm, depth 200 cm |
Weight: | 825 kg |
On request, a second program can be fitted in the machine. This machine type is equipped to permit clamping of 4 saw blade bodies simultaneously, and grinding of up to 4 plate seats during the downward movement of the grinding wheel.Only possible with manual operation, i.e. the loading unit is switched off.